DIY propagation greenhouse
We had some old windows laying around….so one morning the idea popped into our head that we could build a small greenhouse. The purpose of the greenhouse is to propagate and raise seedlings. A bit before the growing season begins, while the weather conditions are still a bit to harsh for sowing outside this little protected space helps a lot to get started early.
With the three old windows we constructed the front, the top and the back. The front windows should be a bit smaller so you get an inclination on the roof. So the rain water can run of in order to protect the wood. We constructed the side panels out of some OSB scrap wood that where left over from another construction. We attached some pieces of wood to the side panels so that the Top can stay open while working in the green house.
Beginning of the construction
Here is a small step by step photo series that shows the construction of the Greenhouse
Happy gardening with home made plants……
Text : Nicolas Bedau
Illustration : Nicolas Bedau
If you have any suggestions, questions or improvements just post a comment below
Leave a comment